TOWA
Towa Bobbin Case Tension Gauge - TM-1 Style L (Including adapter for L)
Shipping calculated at checkout.
WTG0101
| Material | Plastic |
| Color | White |
| Length | 11cm/4.33'' |
| Weight | 100g |
- Tension is no longer mysterious: Regular Size Bobbin Case Gauge for Commercial Style L Bobbin Cases. With the Towa Bobbin Case Tension Gauge the guesswork is gone forever. This bobbin tension gauge allows embroiderers to consistently measure and set accurate embroidery bobbin case tension. In just a few seconds you can verify your bobbin tension is where it should be to achieve optimum results. It's simple to use and comes with complete instructions. No setup is required. It's ready to use right out of the box. Measures tension from 10mN to 400mN.
- How to Use a Bobbin Tension Gauge: Using thread tension gauges makes it easy to adjust both bobbin and upper tensions. It's quick, easy and will help you eliminate unsightly bobbin thread showing on top, looping top stitches and thread breaks. Your embroiTG-Ldery will look its best with consistent, balanced thread tensions. Here's how to use a bobbin tension gauge to take the tension out of setting tensions!
- Instructions for Use: 1.Remove the bobbin case from your machine. Be sure the bobbin thread is out of the pigtail and place your bobbin case with the bobbin in it into the gauge slot. Snap the bobbin case in place. 2.Wrap the bobbin thread around the two pulley wheels and around the plastic hook end on the gauge. 3.Steadily pull the thread and note the reading on the gauge. This represents tension readings in grams. Correct bobbin tensions should be 180 to 220 grams (up to 250 grams when embroidering caps). Please Note: If your gauge is shown in units of 10's, the correct bobbin tensions should be 18 to 22 grams (up to 25 grams when embroidering caps.) 4.Adjust the bobbin case spring tension screw as needed to get the desired reading.
- Note: The gauge needle should provide a steady reading. If you experience a bouncing, erratic reading it can be due to a dirty or defective bobbin case.
- Tip: Slide a business card back and forth under the bobbin tension spring to clear any dirt.
Shipping Rules
We have two shipping methods. If our overseas warehouses have stock, we will give priority to shipping from there, and the estimated delivery time is about 3-5 days. If the goods in the overseas warehouses are sold out, we will ship to you from China, and the estimated delivery time is about 7 days. If there is a demand for returns or exchanges, please refer to the policy for details. Click Here
Tax Rules
All products on this website (except for the Mighty Hoop series), orders placed within the US for less than $800 are tax-free. For customers from other countries,you need to pay the corresponding taxes according to the regulations of your country.
